Best Quality Textile Virgin PET Granule Plastic PET Granule Raw Material Factory Price

PET polyethylene terephthalate plastic, PET is a milky white or light yellow highly crystalline polymer with a smooth and shiny surface. Creep resistance, fatigue resistance, good friction resistance, low wear, high hardness, and the greatest toughness among thermoplastics; good electrical insulation performance, less affected by temperature, but poor corona resistance. Non-toxic, weather-resistant, good stability to chemicals, high hygroscopicity, need to be dried before forming. Resistant to weak acids and organic solvents, but not heat and water immersion, not alkali.

polyester resinIt has the characteristics of high glass transition temperature, slow crystallization, long molding cycle, long molding cycle, large molding shrinkage, poor dimensional stability, brittle crystal molding, and low heat resistance. Through the improvement of nucleating agent, crystallizing agent and glass fiber reinforcing agent, PET not only has the performance of PBT, but also has the following characteristics: 1. The highest heat distortion temperature and long-term service temperature among thermoplastic general engineering plastics. 2. Due to the high heat resistance of reinforced PET, it hardly deforms and does not change color when soaked in a solder bath at 250°C for 10 seconds. It is especially suitable for the welding preparation of electronic and electrical parts; 3. The bending strength is 200MPa, and the elastic modulus is 4000MPa. Good creep and fatigue resistance, high surface hardness, and similar mechanical properties to thermosetting plastics; 4. Since the price of ethylene glycol used in the production of PET is almost half that of butanediol used in the production of PBT, PET resin and reinforced PET are engineering plastics The lowest price in the market, with high cost performance. 5. PET resin is an elastic body after curing, which has excellent waterproof, shockproof adhesion, high and low temperature resistance, and is specially used for bonding engineering plastics due to the research on the molecular structure of the resin through the bull's-eye technology.

IV 0.80 Hot Fill Grade PET Resin

The PET chips are TPA based polyethylene terephthalate homopolymers. It is characterized by heat resistance and is specially designed for tea, juice and other beverage bottles that require hot filling and sterilization.

The PET chips are produced based on higher strength, barrier properties, clarity and better processing characteristics. It is characterized by low content of heavy metals and acetaldehyde, good color value, and stable viscosity, which can meet the processing requirements of thicker and more varieties of small packaging edible oil bottles, wine bottles, medicine bottles, sheets, etc.

IV 0.85 CSD Rapid Reheat Bottle Grade PET Resin

The main features of this type of chip are fast heat absorption, reduced energy consumption, increased blowing speed and output, and improved efficiency. With excellent performance, the main performance criteria of the basic carbonated bottle grade chip remain unchanged.