PC granular resin manufacturers carbon fiber reinforced CF30% conductive raw material polycarbonate

Raw material polycarbonateIs an almost colorless glassy amorphous polymer with good optical properties. PC polymer resin has high toughness. The notched cantilever impact strength of the cantilever is 600-900J/m, and the heat distortion temperature of the unfilled grade is about 130°C. This value can be increased by 10°C after glass fiber reinforcement. The flexural modulus of PC can reach more than 2400MPa, and the resin can be processed into large rigid products. Below 100°C, the creep rate under load is very low. PC has poor hydrolysis resistance and cannot be used for products that repeatedly withstand high-pressure steam. major performance flawpolycarbonate food gradeInsufficient hydrolysis resistance, sensitive to nicks, resistance to organic chemicals, poor scratch resistance, yellowing with prolonged exposure to UV rays. Like other resins, PC is susceptible to attack by certain organic solventspolycarbonate food grade.Raw material polycarbonateis flame retardant. anti-oxidation.Raw material polycarbonateColorless and transparent, heat-resistant, impact-resistant, flame-retardant Class B, with good mechanical properties at normal operating temperatures. Compared with the performance close to PMMA,electric pc particlesIt has good impact resistance, high refractive index and good processing performance. It is UL94 V-2 flame retardant without additives. However, PMMA is morerecycled polycarbonate, and large-scale devices can be produced by bulk polymerization.