Virgin LLDPE 218WJ 218W granular film grade packaging bag blown film

Answer: Property

Recycled plastic pellets belong to the category of plastic pellets. Recycled plastic is a plastic pellet,
It is produced by recycling waste new materials or waste plastics through a screw machine and then cutting them into granular plastics.
Granules through granulator.
It can be divided into level 1, level 2 and level 3.

B：Application

Level 1 refers to the use of raw materials that are floor-free scraps, or scraps. Some are nozzle materials, rubber head materials, etc. The quality is relatively good and are not used. During the processing, new materials, residual small corners, or raw materials Poor quality. Using these as wool-processed particles has better transparency and its quality is comparable to new materials, so it is a kind of material or a special grade material. Secondary refers to the fact that the raw materials have been used once, but except for high-pressure granulation, most of the high-pressure granulation uses imported large intermediate frequency and industrial imported large intermediate frequency films. They have not been weathered, so their quality is very good. Fortunately, the transparency is good. At this time, the processing of particles must be judged based on the brightness of the particles and whether the surface is rough. Level 3 means that the raw materials have been used more than twice, and the processed particles are not very good in elasticity, toughness, etc.

PE recycled plastic:Polyethylene (PE) - milky white, translucent and waxy when uncolored; feels smooth, soft and tough, slightly elongated. Generally, low-density polyethylene is softer and has better transparency, while high-density polyethylene is harder and is mainly used Used in plastic films, handbags, water pipes, oil drums, etc.

PS recycled plastic:Polyethylene (PE) - milky white, translucent and waxy when uncolored; feels smooth, soft and tough, slightly elongated. Generally, low-density polyethylene is softer and has better transparency, while high-density polyethylene is harder and is mainly used Used in plastic films, handbags, water pipes, oil drums, etc.

ABS:It is a plastic polymerized by acrylonitrile, butadiene and styrene. It is brightly colored, heat-resistant and strong. The outer surface can be plated with chrome, nickel and other metal films. It can be used to make piano keys, buttons, knife holders, TV casings, etc. Umbrella handle, ETC.PVC:It is made of polyvinyl chloride plastic with bright color, corrosion resistance, strong and durable. Due to the addition of toxic auxiliary materials such as plasticizers and anti-aging agents during the manufacturing process, its products generally do not store food and medicine.