IC-2002 Medium Temperature Phosphate Coating, Black Phosphate Chemicals

Medium-temperature black phosphorylation solution

Overall 1

Medium temperature phosphate does not require a surface modifier program, nor does it require the addition of neutralizers and accelerators, as long as it is used by diluting it with water within the specified temperature range, it will form an even number, then form one, then form an even number Compact ceramic phosphating film. This phosphated film has good corrosion resistance and can provide rust resistance for a long time, while also having excellent adhesion to each coating, each coating exceeds the national standard. There is very little solution deposit and does not require frequent removal.

2 Use

2.1 Preparation solution (calculated from one ton)

a) Add about 500 kg of water to the water tank, then add 167 kg of medium phospholipid liquid, stir evenly and supply the remaining water. (Phosphonic liquid: water = 1:5)

b) Heat to the specified processing temperature.

2.2 Working solution management:

2.3 Supplement and adjust the working solution (calculated by 1 ton):

The concentration of the working solution is constantly changing during continuous processing, so make sure to make measures and add original liquid to ensure optimal condition.

Typically, adding 4 kg of original liquid to a ton of working solution can increase one total acidity point at a time.

3 packs and shipping

3.1 30 kg/plastic barrel, 200 kg/plastic barrel.

3.2 Storage life is one year under light and dry protection.