Jiangsu Donghai Kaiwang Quartz Water Distiller

Quartz sub-boiling distiller has been tested and reported that pure water is suitable for polarographic analysis, high performance liquid chromatography, ion electrode, atomic absorption analysis, clinical biochemistry, flame photometer and various trace and trace analysis. pure reagent

(1) Ordinary quartz distillers, due to boiling distillation, there are water droplets in the gas, and the gas-liquid separation is not complete, resulting in low water quality; all-glass distillers, mostly due to the pollution contained in the glass itself, affect the water quality and the worse is ion exchange Water, organic matter dissolves into organic matter interference. The quartz sub-boiling still can avoid the pollution of glass impurities and the liquidus temperature is lower than the boiling point. To prevent water from boiling in steam. Both gas and liquid are completely separated. Therefore, the water quality is extremely high, with no heavy metals detected by flameless atomic absorption spectroscopy.

(2) Quartz sub-boiling stills are produced according to the four-part standard. After years of practice and improvement, it has been proved to be more advanced than similar products. Reasonable use of energy, double condensation cycle to extract pure water. Water production: 1000 ml/h has been measured and tested, and an inspection report has been established. Pure water meets polarographic analysis, high performance liquid chromatography, ion electrode, atomic absorption analysis, clinical biochemistry, flame photometer and various trace analysis. It is an ideal equipment for preparing high-purity water or high-purity reagents, and the water quality can reach the standard.

Quartz sub-boiling distiller is a kind of high-purity water and high-purity reagents obtained by using the principle of heat radiation.

1. Q: Are you a factory or a trading company?
A: Donghai Kaiwang Quartz Products Co., Ltd. is located in Donghai Development Zone, the center of silicon materials in China. Established in 2003, we are one of the high-tech enterprises in Jiangsu Province, integrating the design, manufacture and marketing of high-quality quartz stone.

2. Q: Where is your factory located? How can I get there?
A: We are located in Lianyungang, Jiangsu Province, you can get here by various transportation methods. You can go back and forth easily by plane, train or boat. We can arrange a detailed itinerary for you.

3. Q: What is the material of your products?
A: As a professional manufacturer, we produce gas fine quartz tubes, quartz ingots, quartz diffusion tubes, quartz lamp housings and other equipment, which are widely used in semiconductors, solar energy, photovoltaics, transparent quartz crucibles, quartz crucibles, arc quartz crucibles, quartz fiber rods , Quartz rods, quartz plates, quartz slices, quartz slices, quartz heating tubes, crystal tableware, crystal balls.

4. Q: How can I get some samples?
A: We provide samples, but not for free. The costs for our system are as follows:
1) Sample fee If the product the customer wants is our regular size, the customer only needs to pay the shipping cost
2) Refining fee If customers require customized products, we will add shipping fee on the basis of the production cost we need

5. Q: How does your factory do regarding quality control?
A: A full set of advanced equipment and testing instruments have been imported from Taiwan, Germany, etc., and a standard purification workshop has been built to ensure the ability of mass production. The company has passed ISO9001(2000) quality certification. With professional technical team, advanced management mode, sophisticated testing instruments and strong sense of customer service, we will definitely provide customers with high-quality quartz products and considerate services.