High-pressure hose grouting pump waterproof and leak-proof

                   High pressure hose for syringe pump

High-pressure hose is a hose that withstands pressure and transports injected liquid materials, such as acrylic grout, polyurethane grout, etc.

Material

1. Inner tube: Nylon

2. Outer hose: PU

3. Inner diameter: 1/8 Outer diameter: 0.3

4. Working pressure: 4500

5. Explosion pressure: 18000

6. Bending radius: 1/2

7. Length: 5M

How to apply

1. Check whether the hose has any abnormal conditions or conditions before use, such as appearance damage, whether the joint has fallen off

Tight. And try to avoid folding the hose 90 or 180 degrees.

2. The connecting joint part should not be too tight to avoid joint damage and liquid leakage.

3. When using the hose for the first time, it should be tested

Pressure endurance. During the test, hold at the highest pressure for at least 2 minutes to see if the hose expands,

Leaks, explosions and other abnormal conditions. If so, discontinue use of this hose and return it to the factory. If everything is in order, you can apply.

4. The working pressure is not allowed to exceed the standard requirements. Should wear helmets, gloves, protective clothing. Because not every product has absolute safety, construction personnel should pay attention to every process.

5. Although the hose is not damaged, it will age after a long time of use, the pressure resistance will decrease, and the safety performance will decrease. Remember to replace the hose in time.

maintenance and storage

1. Clean the hose with methanol or oil circulation to keep the inside of the hose clean. Some detergent should remain in the hose to avoid clogging.

2. The hose must not be folded. Because folding the hose will destroy its structural organization. It is recommended to store in

circle situation.